Within the comprehensive range of stationary diamond dressing tools, single point diamond dressers still take up an important position. An  indusputable fact is that the single point diamond dressers are the most versatile dressing tools. If high surface finish is a critical issue,  than it is hard to replace a high quality single point dresser with any other dressing tool available.  The classification of industrial diamonds requires extensive experience. We produce single point dressers in 7 different qualities. Based on  the concentration of cracks an inclusions, the type of the diamond and useable points, our products are classified using to the following  codes: CUB  : Usable 1 point for industrial use, diamond form kubic   SD  : Usable 1 point for industrial use, diamond form octaedral, wear resistans better than CUB  SA : Usable 2 points for industrial use, diamond form octaedral, wear resistans same than SD, 1 time resettable. NR  : Usable 3 points for higher industrial use, diamond form octaedral, nice shape, small cracks, 2 times resettable. ME  : Usable 4 points, top quality, diamond form octaedral, nice shape, no cracks, 3 times resettable. PM-SL:Usable 5-6 points absolute top quality, diamond form octaedral, nice shape, no cracks, 4-5 times resettable.  Resetting It is well-known the number of useable points increases with increasing quality of the diamond. Resetting the diamond renews the single  point dresser and enables the customer to benefit maximum from the diamond on hand. In order for us to reset our customer's diamond,  the user should avoid from using the dresser down to the steel holder